SuperATV Rear Windshield

Need help?

Do you have a question about the SuperATV Rear Windshield and is the answer not in the manual?

Summary

Product Introduction and Kit Contents

Overview and Safety Precautions

Provides product name, company info, and critical safety warnings for transport.

Included Components and Hardware

Lists all parts included in the windshield kit, with details continuing on the next page.

Seal Installation

Hardware Identification and Usage

Details the specific hardware (bolts, nuts, washers) and tool usage recommendations.

Applying the Windshield Seal

Step-by-step guide for installing the rubber seal, including flexibility tips.

Bracket Mounting

Attaching Brackets to Windshield

Instructions for positioning and loosely securing large brackets to the windshield panel.

Mounting to Vehicle Frame

Procedure for attaching the windshield assembly to the vehicle's crossbar using brackets.

Installing Small Brackets and Final Tightening

Guidance for installing small brackets and completely tightening all hardware.

Product Care and Legal Information

Windshield Cleaning Procedures

Recommended methods for cleaning the windshield safely and effectively.

Liability and User Responsibility

Legal statement outlining product liability, warranty, and user obligations.

This document provides installation instructions for a SuperATV Rear Windshield designed for the Can-Am Defender.

Function Description:

The SuperATV Rear Windshield is an accessory designed to be installed on a Can-Am Defender to provide protection from wind, debris, and other elements. It is intended to enhance the comfort and safety of the vehicle's occupants by creating a barrier at the rear of the machine. The installation process involves securing the windshield to the vehicle's crossbar using a combination of large and small brackets, along with specific hardware.

Important Technical Specifications:

Compatibility: Specifically designed for Can-Am Defender models.
Hardware:
- M6-1.0 x 20mm Lg. BHCS (Button Head Cap Screws): 14 pieces
- M6-1.0 Nylock Nut: 14 pieces
- M6 Sealing Washer: 14 pieces
Brackets:
- Small Bracket: 2 pieces
- Large Bracket: 5 pieces
Seal: A continuous seal is provided to be installed around the edge of the windshield.
Material: The windshield itself is a clear panel, likely made from a durable, impact-resistant plastic such as polycarbonate, although the specific material is not explicitly stated. The brackets appear to be made of a robust material, possibly metal or a heavy-duty composite, with rubber components where they contact the windshield.

Usage Features:

Installation Method: The windshield is mounted using a combination of large and small brackets. The large brackets secure the lower and middle sections of the windshield to the machine's crossbar, while the small brackets secure the top section.
Hardware Type: The installation exclusively uses M6 hardware, including button head cap screws, Nylock nuts, and sealing washers.
Seal Application: A continuous seal is applied around the perimeter of the windshield. The bulb portion of the seal must always face towards the vehicle. For easier installation and increased flexibility, it is recommended to soak the seal in hot water before cutting or installing.
Orientation: The side of the windshield that faces the inside of the machine is indicated, ensuring correct installation.
Transport Recommendation: SuperATV specifically advises against keeping the windshield installed while transporting the vehicle on an open-air trailer. This suggests potential issues with aerodynamic forces or damage during high-speed transport.
Tooling: The instructions emphasize the use of hand tools only for assembly, explicitly prohibiting the use of power tools. This is crucial to prevent overtightening, stripping threads, or damaging components.
Rubber Placement: When installing, it is critical that the rubber components of the brackets face the windshield to provide cushioning and prevent scratching.

Maintenance Features:

Cleaning Instructions (Windshield):
- Prohibited Cleaners: Do NOT use window cleaning fluids (e.g., Windex, 409), solvents (e.g., gasoline, denatured alcohol, acetone), abrasive cleaners, abrasive pads, gritty cloths, razor blades, scrapers, squeegees, or brushes. These can scratch or damage the windshield surface.
- Recommended Cleaning Process:
  1. Thoroughly rinse the windshield to remove loose dirt and mud.
  2. Clean the windshield with warm water and a gentle detergent (such as baby shampoo or hand washing soap) using a soft cloth or microfiber cloth.
  3. To prevent water spots, blot the windshield dry with a chamois.
General Maintenance: The document implies that proper installation and adherence to cleaning guidelines will contribute to the longevity and performance of the windshield. The use of Nylock nuts suggests a design intended to resist loosening from vibrations, reducing the need for frequent re-tightening.

Additional Information:

Support: SuperATV provides customer support via email (sales@superatv.com), phone (1-855-743-3427), and their website (www.superatv.com). Support hours are listed for Monday-Thursday, Friday, and Saturday.
Liability Statement: The document includes a comprehensive liability statement, outlining SuperATV's warranty limitations, disclaimers regarding product interference with aftermarket accessories, risks associated with vehicle operation, and the user's responsibility to adhere to laws and manufacturer specifications. It also states that SuperATV is not responsible for damages resulting from improper installation, misuse, or modification. The total liability is limited to the purchase price of the product.