To Next Page
D
Dr. Natasha CrossAug 11, 2025
What to do if SuperATV WN-2500 Winches motor does not turn on?
- CcamachoamyAug 11, 2025
If the SuperATV Winches motor does not turn on, check the following: * Ensure the Rocker Switch is fully inserted into the Controls Splitter Connector and connected to the ignition power source. * Tighten any loose battery cable connections. * Replace the Rocker Switch if it's defective. * Check for voltage at the armature port with the Rocker Switch pressed; if voltage is present, replace the Motor. * Allow any water that has entered the Motor to drain, let the Winch dry, and operate it in short cycles without a load until completely dry. * Tap on the Solenoid with the handle end of a screwdriver if it is sticking.
General