Page 8
FIFTH WHEEL PLATE , KING PIN & ROLLER
Inspect all mounting bracket and hitch hardware, that it is securely fastened. The Fifth Wheel Plate should be removed
and inspected, checking all moving parts for wear—clean as directed above. Inspect all mounting bolts, and mounting
post holders periodically for tightness and general condition. When storing the SuperGlide hitch, you should be sure that
the Fifth Wheel Plate and Way Tubes are covered with the appropriate lubricant as directed above (conventional grease
or SlipPlate™, or a light oil for those with a Plastic Wear Plate). Cover the entire assembly to prevent accumulation of
dirt, grime, or rust. We suggest purchasing a SuperGlide hitch cover (Part# 3334) directly from PullRite to protect your
investment. Call (800) 443-2307 to order.
ANNUAL MAINTENANCE
The plate and it’s moving parts should be lubricated with a
light lubricant such as WD-40 or 3-in-1 oil, before each trip or
as needed. Be sure the plate is free of dirt and old oil buildup.
Pull the Release Handle repeatedly so that the lubricant will
spread among the moving parts that may not have otherwise
been covered sufciently.
Be sure the trailer’s king pin is clean and free from rust. A light
coating of WD-40 or other similar lubricant should be used on
the king pin.
Inspect the Roller to ensure it is securely fastened.
PIVOT BOLT, HITCH PINS & ROLLER
Inspect and lubricate the Pivot Bolt monthly with axle
grease when heavily used, or annually with light use. To
remove the pivot bolt for lubrication:
1. Remove the Fifth Wheel Plate from the Rocker
Arm.
2. Remove the Hex Nut, Lock Washer and Plastic
Washers from the Rocker Arm Pivot Bolt.
3. Place downward force, compressing the Rocker
Arm Spring, enabling the Pivot Bolt to be removed.
4. Lube the Pivot Bolt generously with a quality axle
grease and reinstall. Tighten the Pivot Bolt to the
point where there is resistance when you move the
Rocker Arm side-to-side.
5. A light coating of lubricant on the hitch pins and pin
clips will help you install and reinstall them easily.
Inspect the Roller to ensure it is securely fastened.
rocker arm
pivot bolt
rocker arm
hitch pins
and clips
rocker arm spring
roller
To Next Page
Loading...