4
USING THE APPLIANCE
1. Plug the mains plug into a mains socket.
2. The appliance has the following functions:
• Low speed (1)
• Medium speed (2)
• High speed (3)
• Fan rotation
• Programmable timer for 20 – 120 minutes operating time.
3. Turn the start control to “ON” and then press one of the speed buttons. The
appliance will start up.
4. You can start the rotation function by pressing the “OSCILLATION“ button. You
can only start the swivel function once the fan is already running. The fan will
turn if the (MOVE) button is depressed and will remain still if the button is not
activated (STOP). Should you wish to switch from rotation mode to still mode,
press the button and the fan will stay in the current position.
5. You can turn on the timer function by rotating the time control to the desired
operating time. Then press one of the speed buttons (1 – 3 ). The fan will turn off
once the time has elapsed. The control will then read “OFF”:
TIP: The timer clock in the fan will continue to tick after the appliance has been
automatically switched off. Press the “OFF” button next to the speed buttons.
6. If you wish to turn the fan off manually, press the “OFF” button next to the
speed buttons.
CLEANING AND CARE
Beware:
Always remove the plug from the mains socket before cleaning.
• Do not immerse the appliance, power cable and plug in water or other liquids
while cleaning. Clean with a dry cloth.
• In cases of ingrained dirt, you can wipe down the outside of the appliance with a
damp cloth and then dry off carefully. Make sure that no moisture gets into the
inside of the appliance.
• When cleaning, do not use any aggressive detergents, wire brushes, abrasive
cleaners or other hard objects that could scratch the surfaces.
• Clean the appliance regularly.
• Do not use oil-based solvents, petrol or cleaners, as these can damage the
housing.
To Next Page
Loading...