Supermicro AOC-S3008L-L8e - Installation; Static-Sensitive Devices

3-1
Chapter 3: Installation
Chapter 3
Installation
Note: Your system came with the AOC-S3008L-L8e/AOC-S3008L-L8e+ add-on card
pre-installed as a part of an integrated solution. We do not recommend that any part
of your system components be removed and re-installed. However, if you do need to
remove or re-install a system component, including this add-on card, please follow
the instructions below to ensure proper system setup. Also, be sure to remove the
power cord rst before adding, removing or changing any hardware components to
avoid damaging the system or components.
3-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam-
aging your add-on card, it is important to handle it very carefully. The following
measures are generally su󰀩cient to protect your equipment from ESD.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing the add-on card from the
antistatic bag.
• Handle the add-on card by its edges only; do not touch its components, or
peripheral chips.
• Put the add-on card back into the antistatic bags when not in use.
• For grounding purposes, make sure that your system chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the add-on card.