Supermicro AOC-S3008L-L8i - Connectors & Headers; UART0 Header; System Management Bus (SMB) Header

Chapter 2: Hardware Components
2-3
J2
J6
J7
J9
J1
J5
BAR CODE
AOC-S3008L-L8i
REV.
1.01
SAS 4-7
SAS 0-3
WWN
HB_LED
SMB
J8
SAS 3008 CTRL
2-4 Connectors & Headers
UART0 Header
The universal asynchronous receiver/transmitter (UART) header is located on J5
on the AOC-S3008L-L8i. Connect a cable on this header for UART support, which
will provide serial communications over a computer, a peripheral device, or a serial
port. See the layout below for the location.
System Management Bus (SMB) Header
The SMB header (J9) is used to monitor critical parameters on the add-on card to
enhance overall system performance. See the layout below for the location.
1 2
1. UART0 Header
2. SMB Header