SUPERMICR Add-On Card for up to Two NVMe SSDs
About this User’s Guide
This user’s guide is written for system integrators, IT technicians, and knowledgeable end users. It provides information for
the installation and use of the AOC-SLG3-2M2 expansion card.
About this Expansion Card
The AOC-SLG3-2M2 is an M.2 SSD carrier card that enables the user to add up to two Non-Volatile Memory express (NVMe)
M.2 Solid-State Drives (SSDs). M.2 solid-state technology is an optimized, high-performance scalable storage solution,
effectively streamlined for enterprise and client systems that leverage the cutting-edge capabilities of PCI-Express.
An Important Note to the User
All images and layouts shown in this user’s guide are based upon the latest PCB revision available at the time of publishing.
The card you have received may or may not look exactly the same as the graphics shown in this user’s guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-fore any warranty service will be rendered.
You can obtain service by calling your vendor for a Returned Merchandise Authorization (RMA) number. When returning the
AOC-SLG3-2M2 card to the manufacturer, the RMA number should be prominently displayed on the outside of the shipping
carton, and the shipping package is mailed prepaid or hand-carried. Shipping and handling charges will be applied for all
orders that must be mailed when service is complete. For faster service, you can also request a RMA authorization online
http://www.supermicro.com/RmaForm/.
This warranty only covers normal consumer use and does not cover damages incurred in shipping or from failure due to the
alteration, misuse, abuse or improper maintenance of products.
During the warranty period, contact your distributor first for any product problems.
Conventions Used in the User’s Guide
Pay special attention to the following symbols for proper system installation and for safety instructions to prevent damage to
the system or injury to yourself:
Note: Additional information given for proper system setup.
Contacting Supermicro
To Next Page
Loading...