To Next PageTo Next Page
Need help?Do you have a question about the Supermicro 6038R-E1CR16H and is the answer not in the manual?
General| CPU Series | Intel Xeon Scalable |
|---|---|
| Memory Capacity | Up to 3TB |
| SAS Controller | LSI 3008 SAS3 controller |
| Storage Bays | 16 x 2.5" hot-swap bays |
| Maximum Storage Capacity | Up to 128TB |
| SATA Controller | Integrated |
| IPMI | Yes |
| Power Supply | Redundant 1600W |
| Operating System Support | Windows Server, Linux |
| RAID Support | RAID 0, 1, 10 |
| Memory Slots | 16 DIMM slots |
Details the X10DRH-iT serverboard's processors, memory, storage, and ports.
Outlines the SC836BE1C-R920B chassis features like power, storage, panel, and cooling.
Covers rack and server safety, ambient temp, airflow, loading, and grounding concerns.
Provides steps for separating rack rails and installing inner chassis rails.
Warns to disconnect all power sources before accessing chassis interior.
Warns of explosion risk from incorrect battery replacement and guides disposal.
Details that all connections must be removed to de-energize units with multiple PSUs.
Alerts to hazardous voltage present on the backplane during system operation.
Warns that fans may still be turning when removed from the chassis.
Emphasizes using designated cables to prevent malfunction or fire.
Offers warnings and instructions for installing CPU processors and heatsinks.
Guides on installing DIMM modules into the serverboard's memory slots.
Guides on accessing, installing, and removing hard drive carriers and drives.
Covers the redundant 920W power supply, failure indication, and replacement procedures.
Introduces the advanced settings available for system configuration.
Allows viewing CPU information and configuring settings like clock spread and hyper-threading.
Covers settings for power technology, CPU P-states, and C-states for power saving.
Manages CPU throttling and power limit configurations for performance and efficiency.
Enables configuration of North Bridge and IIO settings, including PCIe port bifurcation.
Allows configuration of PCI-E port settings like latency, speed, and error handling.
Allows configuration of SATA controller, port settings, and drive types.
Allows configuration of sSATA controller, port settings, and drive types.
Provides step-by-step instructions for enabling the Trusted Platform Module (TPM).
Configures ACPI settings for WHEA, High Precision Event Timer, and NUMA support.
Allows configuration of Intelligent Platform Management Interface (IPMI) settings, including network configuration.
Enables setting administrator and user passwords for system security.
Configures boot mode, boot order priorities, and deletion of boot options.
