Supermicro H12 - Page 29

Chapter 2: Conguring Secure Erase Settings in the BIOS


If you've properly entered the correct PSID, a screen with the PSID you've entered
will display as shown below.

    󰀨   

box to proceed with system boot.

valid PSID and press <Enter> to continue with system boot. Press <Del> during system

Note: 
is entered for the selected drive, this disk drive will be locked. When this happens,


WARNING!! Be sure to keep your password (and PSID, if any) in a safe and secure place.
When a device is locked caused by an invalid password, it will remain locked, making
the BIOS Setup utility unavailable for conguration until the correct password is entered!