Need help?Do you have a question about the Supermicro Supero SAS-743TQ and is the answer not in the manual?
General| Product Name | Supermicro Supero SAS-743TQ |
|---|---|
| Interface | SAS/SATA |
| Max Devices Supported | 128 |
| Battery Backup Unit | Optional |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Connector Type | SAS |
| Operating Systems Supported | Linux |
Preventing damage to electronic components from electrostatic discharge (ESD).
General safety precautions for handling computer components and the backplane.
Notes on PCB revision differences between the manual and the actual product.
Overview of the SAS-743TQ backplane's design and performance.
Diagram and labeling of all connectors on the front of the SAS-743TQ backplane.
Pin definitions for JTAG, power, activity LED, sideband, I2C, and SAS ports.
Diagrams and pin definitions for front jumpers, including settings and explanation.
Configuration details for using I2C or SGPIO modes with various jumpers.
Chart detailing SAS port connections for I2C and SGPIO modes.
Description and specification for the front panel LED indicators.
Identification of rear connectors and associated drive activity and failure LEDs.
To Next Page