Need help?Do you have a question about the Supermicro X11DPi-N and is the answer not in the manual?
General| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
|---|---|
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| ECC | Yes |
| Memory voltage | 1.2 V |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 2048 GB |
| Supported memory clock speeds | 2133, 2400, 2666 MHz |
| Number of DIMM slots | 16 |
| PCI Express x8 (Gen 2.x) slots | 0 |
| Supported RDIMM module capacity | 64GB |
| RAID levels | 0, 1, 5, 10 |
| Supported storage drive interfaces | SATA III |
| On-board graphics card model | Aspeed AST2500 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating relative humidity (H-H) | 10 - 85 % |
| System bus rate | 10.4 GT/s |
| Processor manufacturer | Intel |
| Processor thermal power (max) | 205 W |
| Processor number of cores supported | 28 |
| Wi-Fi | No |
| Ethernet interface type | Gigabit Ethernet |
| Component for | Server |
| Motherboard chipset | Intel® C621 |
| Motherboard form factor | Extended ATX |
| PCI Express x16 (Gen 3.x) slots | 4 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | 3 |
| BIOS type | UEFI AMI |
| Harmonized System (HS) code | 84733020 |
Weight and Dimensions| Depth | 330.2 mm |
|---|---|
| Width | 304.8 mm |
To Next Page
