Need help?Do you have a question about the Supermicro SUPERSERVER 6028U-T Series and is the answer not in the manual?
General| Form Factor | 2U |
|---|---|
| Chipset | Intel C612 |
| Processor Support | Intel Xeon E5-2600 v3/v4 |
| Memory Slots | 16 |
| Maximum Memory | 1TB |
| Memory Speed | 2400/2133/1866/1600MHz |
| Storage Bays | 12x 3.5" Hot-swap SAS/SATA drive bays |
| SAS Controller | LSI 3008 SAS3 controller |
| Management | IPMI 2.0 with KVM |
Explains the purpose and intended audience of the manual.
Provides links to download necessary drivers, utilities, and safety information.
Information on how to find a secure data deletion tool on the Supermicro website.
Highlights symbols used in the manual to indicate important warnings.
Provides a general description of the SuperServer 6028U-T Series and its models.
Details the specifications and features of the X10DRU-i+ motherboard.
Outlines the main features of the SC829UAC chassis.
Provides contact information for Supermicro headquarters and regional offices.
Instructions for inspecting the system packaging upon arrival.
Guidelines for selecting a suitable installation location and preparing the server.
Safety precautions for rack mounting and server handling.
Step-by-step guide for mounting the server chassis into a rack using rails.
Introduces the server's front panel, hard drive, and power supply status lights.
Describes the function of the power and reset buttons on the front panel.
Explains the status indicators (LEDs) on the control panel.
General warnings and instructions before connecting the system to power.
Specifies the required rating for the building's short-circuit protection device.
States that only trained and qualified personnel should install or service equipment.
Warns about the danger of explosion if batteries are replaced incorrectly.
Advises using provided cables and adapters to prevent malfunctions or fire.
Precautions to prevent damage to electronic components from static discharge.
Detailed steps for installing CPUs and their corresponding heatsinks.
Instructions for connecting data, power, and control panel cables to the serverboard.
Identifies and describes the rear panel I/O ports.
Guides on installing DIMM modules into the serverboard memory slots.
Provides a layout and quick reference for serverboard jumpers and connectors.
Detailed pin definitions for various power and control panel connectors.
Explains the function and settings of various jumpers on the serverboard.
Describes the status LEDs for IPMI LAN, HDD, Power, and BMC.
Steps for installing the Windows operating system, including RAID configuration.
Guide for downloading and installing system drivers and utilities from the Supermicro website.
Information on Baseboard Management Controller (BMC) for remote access and monitoring.
Instructions for handling and disposing of the onboard battery.
Precautions to prevent damage from electrostatic discharge (ESD) during installation.
Details on connecting the chassis control panel to the serverboard.
Step-by-step guide on how to safely remove the server chassis top cover.
Procedures for installing and removing hot-swappable hard drives and carriers.
Information on installing PCI-E expansion cards using riser cards.
Instructions for replacing a system fan if it fails.
Guide on replacing a hot-plug power supply module.
Introduces the AMI BIOS setup utility and navigation.
Overview of the Main BIOS setup screen and its displayed information.
Details various advanced BIOS settings for CPU, chipset, and power management.
Information on configuring and viewing SMBIOS event logs.
Settings for Intelligent Platform Management Interface (IPMI) for system management.
Configuration options for system password protection and administrator access.
Settings related to system boot order, device selection, and boot options.
Options for saving BIOS changes, restoring defaults, and exiting the setup utility.
Lists common BIOS beep codes indicating POST errors and their meanings.
Provides information on where to find additional BIOS checkpoint codes online.
Explains the Unified Extensible Firmware Interface (UEFI) and its role.
Describes the structure of a UEFI BIOS flash chip and the boot block.
Step-by-step guide for recovering the BIOS image using a USB device.
Lists the supported processor types and socket configurations.
Details the serverboard's memory capacity and supported RAM types.
Specifies the number and type of SATA 3.0 ports supported.
Provides dimensions and model information for the server chassis.
Outlines the recommended operating temperature and humidity ranges.
Lists electromagnetic emissions, immunity, and safety compliance standards.
To Next Page