Chapter 2: Conguring Secure Erase Settings in the BIOS
Yes> and press
screen below.
as shown in the screen below. When this screen as shown below appears, it indicates that
you've successfully set up the password for the selected drive.
In the dialogue box above, enter the password you've set for this device and press <Enter>
WARNING!! Be sure to keep your password (and PSID, if any) in a safe and secure place.
When a device is locked caused by an invalid password, it will remain locked, making
the BIOS Setup utility unavailable for conguration until the correct password is entered!
To Next Page
Loading...
