Need help?Do you have a question about the Supermicro x10qbi and is the answer not in the manual?
General| Socket | LGA 2011 |
|---|---|
| Memory Slots | 8 |
| Expansion Slots | 4 x PCI-E 3.0 x16 |
| Storage Interface SATA | 6x SATA 3.0 |
| USB Ports | 4x USB 3.0 |
| Power Connector | 24-pin ATX |
| Maximum Memory | 2TB |
Illustrates the layout of the I/O module, showing ports and connectors.
Presents industry-standard warnings related to bodily injury and component handling.
Explains electrostatic discharge (ESD) and precautions for handling static-sensitive components.
Details the process of installing Intel E7-4800/8800 (V3) processors onto the main board sockets.
Guides on aligning and carefully lowering the CPU into the socket, emphasizing correct orientation.
Instructs on installing the I/O module onto the SIO slot of the baseboard before powering on.
Guides on inserting DIMM modules into the memory card slots, emphasizing proper seating.
Explains how to install the populated memory cards onto the baseboard's CPU slots.
Provides step-by-step instructions for mounting the motherboard into the chassis using screws and standoffs.
Provides initial troubleshooting steps for system issues before power on and when no power is detected.
Addresses issues related to no video, system boot failure, and loss of setup configuration.
Guides on resolving memory errors and system instability, covering CPU, memory, HDD, and cooling.
Answers common questions about memory support, BIOS updates, and system CD contents.
Introduces the Advanced tab and its submenus for system configuration.
Details CPU-specific settings including socket info, cache, clock spread, and hyper-threading.
Covers advanced power management, DCA, AES-NI, and integrated IO settings.
Details North Bridge, IIO configuration for PCIe, and IOAT settings.
Covers Quick Path Interconnect settings and various memory configuration options.
Configures memory reliability, rank sparing, error handling, and interleaving modes.
Configures serial ports, console redirection, terminal types, and flow control.
Lists beep codes and corresponding error messages for POST failures.
Guides on installing software and drivers from the CD or website after OS installation.
Explains the use of SuperDoctor III for system monitoring, remote management, and threshold settings.
Explains the structure of UEFI BIOS images and recovery blocks.
Details the procedure for recovering the main BIOS block using a USB-attached device.
Provides steps to reboot the system using Jumper JBR1 for BIOS recovery purposes.
To Next Page