Supermicro x10qbi - Onboard LED Indicators

2-40
X10QBi Platform User's Manual
SW1
LED28
JPB1
JPG1
JPL1
AOM-X10QBi-A/L
Rev. 1.02
SWUID1
JEDUID1
COM2
IPMI_LAN
LAN2
LAN1
VGA1
VGA2
LAN CTRL
BMC
2-10 Onboard LED Indicators
A. LAN1/2 LEDs
B. IPMI LAN LEDs
IPMI-Dedicated LAN LEDs (On the I/O
Module)
In addition to LAN 1/LAN 2, an IPMI-dedicat-
ed LAN is also located on the I/O module.
The yellow LED on the right indicates activ-
ity, while the green LED on the left indicates
the speed of the connection. Refer to the
tables on the right for more information.
Link LED Activity LED
IPMI LAN (F models only)
A
B
LAN LEDs (On the I/O Module)
Two LAN ports (LAN 1/LAN 2) are located
on the I/O module of the system. Each Eth-
ernet LAN port has two LEDs. The green
LED indicates activity, while the other Link
LED may be green, yellow, or off to indicate
the speed of the connections. Refer to the
tables on the right for more information.
LAN 1/LAN 2 Link LED (Left)
LED State
LED Color Denition
N/A 10 Mbps
Off 100 Mbps
Yellow 1 Gbps
Green 10 Gbps
LAN 1/LAN 2 Activity LED (Right)
LED State
Color Status Denition
Green Blinking Active
Activity LEDLink LED
A
B
IPMI_LAN Link LED (Left)
LED State
LED Color Denition
Off 10 Mbps
Green 100 Mbps
Amber 1 Gbps
LAN 1/LAN 2 Activity LED (Right)
LED State
Color Status Denition
Yellow Blinking Active