Supermicro x10qbi - USB and SATA Configuration

4-18
X10QBi Platform User’s Manual
Legacy USB Support (Available when USB Functions is not Disabled)
Select Enabled to support legacy USB devices. Select Auto to disable legacy sup-
port if USB devices are not present. Select Disabled to have USB devices available
for EFI (Extensive Firmware Interface) applications only. The settings are Enabled,
Disabled, and Auto.
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will
be claimed by the EHCI driver. The settings are Disabled and Enabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support which will provide complete
USB keyboard legacy support for the operating system that does not support Legacy
USB devices. The options are Disabled and Enabled.

SATA Conguration
When this submenu is selected, the AMI BIOS automatically detects the presence
of SATA devices and displays the following items:
SATA Controller
This item enables or disables the built-in SATA controllers on the motherboard. The
options are Disabled and Enabled.
Congure SATA as
Use this feature to congure the SATA mode for a devices installed in the SATA
port specied by the user. The options are IDE, AHCI, and RAID.
SATA Port 0/SATA Port 1/SATA Port 2/SATA Port 3/SATA Port 4/SATA Port 5
This section allows the user to congure the following settings for the SATA port
specied by the user.
SATA RAID Option ROM/UEFI Driver (Available when "Congure SATA as"
is set to RAID)
This feature allows the use to dene the RAID settings for the system. The options
are Legacy, EFI, and Disabled.
Software Preserve
Port 0/Port 1/Port 2/Port 3/Port 4/Port 5
Select Enabled to enable the port specied by the user. The options are Enabled
and Disabled.