Supermicro x10qbi - 4-3 Advanced Setup Configurations (Overview)

4-4
X10QBi Platform User’s Manual
4-3 Advanced Setup Congurations
Select the Advanced tab to access the following submenu items.
Boot Features
Boot Conguration
Quiet Boot
Use this item to select bootup screen display between POST messages and the
OEM logo. Select Disabled to display the POST messages. Select Enabled to
display the OEM logo instead of the normal POST messages. The options are
Disabled and Enabled.
AddOn ROM Display Mode
Use this item to set the display mode for the Option ROM. Select Keep Current
to use the current AddOn ROM Display setting. Select Force BIOS to use the Op-
tion ROM display set by the system BIOS. The options are Force BIOS and Keep
Current.
Bootup Num-Lock
Use this item to set the power-on state for the Numlock key. The options are On
and Off.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the 'F1' key is pressed when an
error occurs. The options are Disabled and Enabled.