Supermicro x10qbi - Peripheral Devices

1-14
X10QBi-F Platform User’s Manual
Chipset
• Intel® Intel 602J PCH
Expansion
• Four (4) PCI-E 3.0 x16 (Slot2/Slot4/Slot9/Slot11)
• Seven (7) PCI E 3.0 x8 (Slot1/Slot3/Slot5/Slot6/ Slot7/
Slot8/Slot10)
Slots (See
Page 1-10)
I/O Module
Slot
• One (1) SIO Slot for AOM-X10QBi-A/L module
Graphics
• AST2400 BMC Video Controller
Network
• One Intel Gigabit Ethernet Dual-Channel Controller
for LAN 1/LAN 2 ports.
• One IPMI LAN 2.0 port supported by the BMC
I/O Devices
SATA Connections
• SATA Six (6) SATA Ports I-
SATA0-5
• RAID (Windows) RAID 0, 1, 5, 10
Integrated IPMI 2.0
• IPMI 2.0 supported by the AST2400 BMC
Serial (COM) Port
• One (1) Fast UART 16550 Connection on the AOM-
X10QBi-A/L I/O module for backpanel support
• One Front Accessible Serial Header located on the
X10QBi system board
Baseboard Controller
• AST2400
Peripheral
Devices
USB Devices
• Three (3) USB Headers with six connections (USB
0/1, USB 2/3, USB 6/7)
• Two (2) Type A internal connector (USB 4/5)
BIOS
• 16 MB AMI BIOS
®
UEFI EEPROM Flash BIOS
• APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard,
Plug & Play (PnP), and SMBIOS 2.5
Power
• One (1) 24-pin ATX Main Power Supply Connector
(JPW1)
• Six (6) 8-pin Power Connectors (JPW2-JPW7),
• One (1) SATA DOM Power Connection (JSD1)
Note: All of these power connections are
required for adequate power supply for the
components and the system.