Supermicro x10qbi - Page 23

Chapter 1: Overview
1-15
• ACPI/ACPM Power Management
Cong.
• Main switch override mechanism
• Power-on mode for AC power recovery
• Intel
®
Intelligent Power Node Manager (Available
when the NMView utility is installed in the system)
• Manageability Engine
PC Health
CPU Monitoring
Monitoring
Onboard voltage monitors for CPU Vcore (up to 4 CPU
cores), 3.3VDD, 3.3VSB, 12V, 5V, Memory Voltage, and
Battery Voltage.
• CPU 7-Phase switching voltage regulator
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Thermal Monitor 2 (TM2) support
Fan Control
• Ten (10) 4-pin system cooling fans with fan status
monitoring with rmware (Pulse Width Modulation)
fan speed control and low noise fan speed control)
System Man-
agement
• PECI (Platform Environment Conguration Interface)
2.0 support
• System resource alert via SuperDoctor® III
• SuperDoctor III, Watch Dog, NMI
• Chassis Intrusion Header and Detection
Dimensions
• 19.0" (L) x 17.0" (W) (482.60mm x 431.80 mm)
(X10QBi system baseboard)
Notes:
1. For IPMI conguration Instructions, please refer to the "Embedded IPMI
Conguration User's Guide" available @ http://www.supermicro.com/sup-
port/manuals/.
2. For PCI-E expansion slots to work properly, please refer to the instruc-
tions listed on page 1-10.