Supermicro x10qbi - Ethernet Ports (on the I;O Module)

2-22
X10QBi Platform User's Manual
A. LAN1
B. LAN2
C. IPMI_LAN
Ethernet Ports (On the I/O
Module)
Two Ethernet ports (LAN1/LAN2) are
located on the AOM-X10QBi-A/L I/O
module. In addition, an IPMI_dedi-
cated LAN is also located on the
I/O module to provide KVM support
for IPMI 2.0. All these ports accept
RJ45_type cables.
Notes: 1. Please refer to
Section 2-11 for LAN LED
information.
2. USB connections are
located on the X10QBi base-
board.
LAN Ports
Pin Denition
Pin# Denition
1 TRCT2 13 IETCT
2 TRD2+ 14 IET+
3 TRD2- 15 IET-
4 TRD3+ 16 N/A
5 TRD3- 17 LED1_Green-
6 TRCT3 18 LED1_Green+
7 TRCT1 19 LED2_Yellow-
8 TRD1+ 20 LED2_Common+
9 TRD1- 21 LED2_Green-
10 TRD4+ 22 Case_Ground
11 TRD4- 23 Case_Ground
12 TRCT4
(NC: No Connection)
SW1
LED28
JPB1
JPG1
JPL1
AOM-X10QBi-A/L
Rev. 1.02
SWUID1
JEDUID1
COM2
IPMI_LAN
LAN2
LAN1
VGA1
VGA2
LAN CTRL
BMC
AOM-X10QBi-A/L I/O Module
A
C
B