A
A. SMB to PCI-E
Slots
B. TPM Enabled
B
Note: For more information on IPMI conguration, please refer to the
WPCM 450 IPMI BMC User's Guide posted on our website @ http://www.
supermicro.com.
TPM Support Enable
JPT1 allows the user to enable TPM (Trusted
Platform Modules) support which will enhance
data integrity and system security. Refer to
the table on the right for jumper settings. The
default setting is enabled.
TPM Support Enable
Jumper Settings
Jumper Setting Denition
1-2 Enabled
2-3 Disabled
I
2
C Bus to PCI-Exp. Slots
Use Jumpers JI
2
C1 and JI
2
C2 to connect the
System Management Bus (I
2
C) to the PCI-E
slots to improve system performance. These
two jumpers are to be set at the same time.
The default setting is Open for normal opera-
tion. Refer to the table on the right for jumper
settings.
I
2
C for PCI-E slots
Jumper Settings
Jumper Setting Denition
Closed Enabled
Open Normal (Default)
To Next Page
Loading...
