Supermicro x10qbi - Onboard LAN OpROM and Trusted Computing

Chapter 4: AMI BIOS
4-21
Onboard LAN OpROM (Option ROM) Type
Select Legacy to boot the computer using a legacy network device. Select EFI to
boot the computer using an EFI network device. The options are Legacy and EFI.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM which will allow
the user to boot the computer using a network device. The default setting for LAN1
Option ROM is PXE, and the default setting for LAN2 Option ROM is Disabled.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
ed Extensible Firmware Interface) for network stack support. The options are
Enabled and Disabled.

ACPI Settings
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) plat-
form and provide a common infrastructure for the system to handle hardware errors
within the Windows OS environment to reduce system crashes and to enhance
system recovery and health monitoring. The options are Enabled and Disabled.
Lock Legacy Resources
Select Enabled for locking legacy-resources support . The options are Enabled
and Disabled.
Trusted Computing (Available when a TPM device is detected
by the BIOS)
Conguration
Security Device Support
Select Enabled on this item and enable the TPM jumper on the motherboard to
enable onboard security devices to improve data integrity and network security.
The options are Enabled and Disabled.
TPM (Trusted-Platform Module) State
Select Enabled to enable TPM security settings to improve data integrity and
network security. The options are Disabled and Enabled.
Pending Operation
Use this item to schedule an operation for the security device. The options are None,
Enable Take Ownership, Disable Take Ownership, and TPM Clear.