Chapter 2: Conguring Secure Erase Settings in the BIOS
If you've properly entered the correct PSID, a screen with the PSID you've entered
will display as shown below.
box to proceed with system boot.
valid PSID and press <Enter> to continue with system boot. Press <Del> during system
Note:
is entered for the selected drive, this disk drive will be locked. When this happens,
WARNING!! Be sure to keep your password (and PSID, if any) in a safe and secure place.
When a device is locked caused by an invalid password, it will remain locked, making
the BIOS Setup utility unavailable for conguration until the correct password is entered!