11
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPME2 Manufacturing Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset to System)
Connector Description
BT1 Onboard CMOS battery socket
COM1/COM2 Back panel COM port/COM header for front access
FAN1-6, FANA/FANB System cooling fan headers (FAN1-FAN6, FAN A, FAN B)
IPMI_LAN Dedicated IPMI_LAN port
I-SATA0~3, I-SATA4~7 SATA 3.0 connection header supported by the Intel PCH
JD1 Internal speaker/Buzzer header
JF1 Front Panel Control header
JIPMB1 4-pin BMC External I
2
C header (for an IPMI-supported card)
JL1 Chassis Intrusion header
JM2_1 PCI-E M.2 slot
JNVI
2
C1/JNVI
2
C2
NVMe SMBus (I
2
C) headers used for PCI-E hot-plug SMBus clock & data connections (an SMCI-
proprietary NVMe add-on card and cable are required; available for a Supermicro complete system
only)
JNVME1 NVMe Connector1
JNVME2 NVMe Connector2
JPI
2
C1 Power Supply SMBus I
2
C header
JPWR1/JPWR2 8-pin Power Supply connectors
JPWR3 24-pin ATX main power supply connector
JRK1 Intel RAID Key header for NVMe SDD
JSTBY1 Standby power header
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
LAN1/LAN2 Gigabit LAN/10G LAN Ethernet ports on the IO back panel (10G LAN ports on X11DPi-NT only)
S-SATA0-3 S-SATA 3.0 connection Header supported by the Intel SCU
S-SATA4/S-SATA5
S-SATA Ports with built-in power pins and with support of Supermicro SuperDOM (Disk On Module)
devices
SLOT1/SLOT3 PCI-Express 3.0 X8 Slots supported by CPU1
SLOT2 PCI-Express 3.0 X16 Slot supported by CPU1
SLOT4/SLOT5/SLOT6 PCI-Express 3.0 X16 Slots supported by CPU2
T-SGPIO3 General Purpose Serial I/O Port
UID Unit Identifi er (UID) Switch
USB0/1 Back panel USB 2.0 Ports
USB2/3 Front Accessible USB 2.0 Header
USB4/5 Back panel USB 3.0 Ports
USB6 Type A USB 3.0 Header
To Next Page
Loading...
