Supermicro X11DPi-N - Page 45

45
Chapter 2: Installation
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
12
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
3.3V
OH/Fan Fail LED
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin defi nitions.
Power LED
Pin Defi nitions (JF1)
Pins Defi nition
15 3.3V
16 PWR LED
NMI Button
The non-maskable interrupt (NMI) button header is located on pins 19 and 20 of JF1. Refer
to the table below for pin defi nitions.
NMI Button
Pin Defi nitions (JF1)
Pins Defi nition
19 Control
20 Ground
1. PWR LED
2. NMI
1
2