Supermicro X11SCA - Page 7

Package contents
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) I/O Shield
• One (1) Quick Reference Guide
Connector Description
AUDIO FP Front Panel Audio Header
B3 Onboard Battery
COM1 COM Header
CPU SLOT4 PCI-E 3.0 x8 (INx16) PCI Express x16 Slot (PCI-E 3.0 x8 link)
CPU SLOT6 PCI-E 3.0 x16
PCI Express x16 Slot (PCI-E 3.0 x16 link) or PCI-E 3.0 x8 when Slot4 is
populated
PCH SLOT2 PCI-E 3.0 x4 PCI Express x4 Slot (Slot2 is shared with M.2-M1)
PCH SLOT7 PCI-E 3.0 x1 PCI Express x1 Slot
PCI SLOT1 33MHz PCI Slot, 32 Bit/ 33MHz with 5V single voltage
DP/HDMI DisplayPort Connector/High Denition Multimedia Interface (HDMI)
DVI Digital Video Interface
FAN 1 ~ 5 System/CPU Fan Headers (FAN1 and FAN2: CPU Fans)
HD AUDIO High Denition Audio (back panel)
I-SATA0~7 Intel
®
Serial ATA (SATA 3.0) Ports 0~7 (6Gb/sec)
I-SGPIO1/2 Serial General Purpose I/O Headers
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JLED1 3-Pin Power LED
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JSD1 SATA DOM (Disk On Module) Power Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM) Header
LAN 1/2 Gb RJ45 Port
PCI-E M.2-M1,M2
PCI-E M.2 Connectors 1 and 2, small form factor devices and other
portable devices for high speed NVMe SSDs (M.2-M1 is shared with PCI-
Ex4 Slot)
PCI-E M.2-E1 WiFi+BT (for X11SCA-W only)
SP1 Internal Speaker/Buzzer
SPKR Header for Speaker/Buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)
U.2-1 U.2 Connector 1 for 2.5” SSD Drives (U.2 is shared with M.2-M2)
USB 0/1 Front Access USB 2.0 Header
USB 2/3 Back Panel USB 2.0/3.0 Ports
USB 4/5 Front Access USB 3.0/2.0 Header
USB 6/7 Back Panel USB 3.1 Ports (USB6: Type C, USB7: Type A)
USB 8/9 Front Access USB 3.1 Headers (USB8: Type C, USB9: Type A)
VGA VGA Port (for X11SCA-F, IPMI only)
Jumpers and Connectors
Jumpers
Jumper Description Default
JBT1 Clear CMOS (onboard) Short Pads to Clear CMOS
JPAC1 Audio Enable Pins 1-2 (Enabled)
JPG1 Disable BMC GFX Chip (for X11SCA-F only) Pins 1-2 (Enabled)
JPL1/2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Intel
®
Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (RST)
Connectors