Need help?Do you have a question about the Supermicro X11SPL-F and is the answer not in the manual?
General| Memory voltage | 1.2 V |
|---|---|
| Memory slots type | - |
| Maximum RDIMM memory | 256 GB |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 2048 GB |
| Supported memory clock speeds | 1600, 1866, 2133, 2400, 2666 MHz |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| BIOS type | UEFI AMI |
| ACPI version | 6.0 |
| RAID levels | 0, 1, 5, 10 |
| RAID support | Yes |
| Supported storage drive interfaces | SATA III |
| On-board graphics card model | Aspeed AST2500 |
| Bundled software | Intel® Node Manager, IPMI2.0, KVM w/ dedicated LAN, NMI, SPM, SUM, SuperDoctor® 5, Watchdog |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 8 - 90 % |
| Processor socket | LGA 3647 (Socket P) |
| Processor manufacturer | Intel |
| Processor thermal power (max) | 165 W |
| Processor number of cores supported | 28 |
| Wi-Fi | No |
| Ethernet interface type | Gigabit Ethernet |
| Component for | Server |
| Motherboard chipset | Intel® C621 |
| Motherboard form factor | ATX |
| USB 2.0 connectors | 6 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | 3 |
| Number of DIMM slots | 8 |
| Maximum LRDIMM memory | 512 GB |
| PCI Express x8 (Gen 2.x) slots | 0 |
| Harmonized System (HS) code | 84733020 |
Weight and Dimensions| Depth | 243.8 mm |
|---|---|
| Width | 304.8 mm |
To Next Page