Supermicro X11SPL-F - Page 49

49
Chapter 2: Installation
Trusted Platform Module Header
Pin Denitions
Pin# Denition Pin# Denition
1 +3.3V 2 SPI_CS#
3 RESET# 4 SPI_MISO
5 SPI_CLK 6 GND
7 SPI_MOSI 8
9 +3.3V Stdby 10 SPI_IRQ#
TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and Port 80 connection. Use this header to enhance system performance and data security.
Refer to the table below for pin denitions. Please go to the following link for more information
on the TPM: http://www.supermicro.com/manuals/other/TPM.pdf.
DESIGNED IN USA
BIOS LICENSE
X11SPL-F
REV:1.01
IPMI CODE
MAC CODE
BAR CODE
+
+
VGA
Intel
C621
JLAN1JLAN2
JPWR1
JTPM1
MH11
MH10
JRK1
SP1
LEDBMC
LE3
LEDPWR
JL1
JOH1
JBT1
JSTBY1
JSD1
JSD2
JPL2
JPL1
JVRM1
JWD1
JPG1
JPME2
JIPMB1
JNVI2C1
FAN4
FAN3
FAN2
FAN1
FANA
FANB
FAN5
JPI2C1
JD1
I-SGPIO2
I-SGPIO1
I-SATA4
I-SATA5
I-SATA6
I-SATA7
I-SATA0 I-SATA1
I-SATA2
I-SATA3
JF1
JPWR2
ASpeed
AST2500
CPU SLOT5 PCI-E 3.0 X8
CPU SLOT7 PCI-E 3.0 X8
USB6/7
M.2 PCI-E 3.0 X4
USB12(3.0)
USB10/11(3.0)
USB8/9(3.0)
USB4/5
USB2/3
COM1
COM2
USB0/1
IPMI_LAN
LAN1LAN2
UID-SW UID-LED
PCH SLOT1 PCI-E 3.0 X4(IN X8) CPU SLOT2 PCI-E 3.0 X8
CPU SLOT3 PCI-E 3.0 X8 CPU SLOT4 PCI-E 3.0 X8(IN X16)
CPU SLOT6 PCI-E 3.0 X8(IN X16)
BT1
CPU
DIMMF1 DIMME1 DIMMD1
DIMMA2 DIMMA1 DIMMB1 DIMMC1
RST
JF1
ON PWR UID
LED
PS
FAIL 1
NIC
2
NIC
NMIX
PWRHDD LEDLED
DIMMD2
1
1. TPM Header
2. M.2 Slot
2
M.2 Slot
M.2 is formerly known as Next Generation Form Factor (NGFF). The M.2 slot is designed for
internal mounting devices. The X11SPL-F motherboard deploys an M key dedicated for SSD
devices with the ulitmate performance capability in a PCI-Express 3.0 x4 interface for native
PCI-E SSD support. It can also support SATA devices.