Supermicro X11SSW-TF - DIMM Installation; DIMM Removal

33
Chapter 2: Installation
SAN MAC
+
IPMI CODE
BIOS
LICENSE
BAR CODE
MAC CODE
DESIGNED IN USA
X11SSW-TF
REV:1.01
JPW2
JSTBY1
JSD2 JSD1
JIPMB1
I-SGPIO1
I-SGPIO2
JSXB1C
JSXB1A
JSXB1B
JD1
JBAT1
SP1
JF2
JF1
JUIDB1
LED1
LED3
JL1
JPW1
JPI2C1
I-SATA5
I-SATA0
I-SATA1
I-SATA4
I-SATA3 I-SATA2
JTPM1
JBR1
JWD1
JLED1
JPME2
JPL2
JPL1
JI2C2
JI2C1
JPB1
JPG1
JBT1
DIMMA1
DIMMA2 DIMMB1
DIMMB2
BMC
PCH
JNVME1
LED2
FAN6
FAN5
VGA
FAN4 FAN3
LAN1/2
USB6/7
(3.0)
USB0/1
IPMI_LAN
COM1
FAN2
FAN1
USB9/10(3.0)
USB8(3.0)
USB4/5
USB2/3
COM2
CPU
LAN3/4
LAN1/2
CTRL
LAN3/4
CTRL
J3
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots, starting with DIMMB2
(Channel B, Slot 2, blue slot). For best
performance, please use the memory
modules of the same type and speed in
the same bank.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.