Supermicro X11SSW-TF - Pci Express Configuration

X11SSW-TF/-4TF User Manual
86
REFRESH_2X_MODE
Use this feature to select the refresh mode. The options are Disabled, 1-Enabled for WARM
or HOT, and 2-Enabled HOT only.
Closed Loop Thermal Management
Use this feature to monitor the power consumption and temperature of the system to predict
a thermal trend. The options are Disabled and Enabled.
GT - Power Management Control
GT - Power Management Control
The following GT - Power Management Control information will be displayed:
• GT Info
RC6 (Render Standby)
Select Enabled to enable render standby support. RC6 is a power saving feature that allows
the onboard graphics to enter standby mode to decrease power usage. The options are
Disabled and Enabled.
PCH-IO Conguration
The following PCH-IO information will be displayed:
• Intel PCH RC Version
• Intel PCH SKU Name
• Intel PCH Rev ID
PCI Express Conguration
PCI Express Conguration
PCH DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and Enabled.
Peer Memory Write Enable
Use this feature to enable or disable peer memory write. The options are Disabled and
Enabled.