13
Chapter 1: Introduction
Connector Description
JPWR1
4-pin 12V Power Connector, providing up to 75W for connected devices such as a GPU add-on
card when 24-pin ATC power is not in use
JSD1 SATA DOM Power Connector
JSMB1 PCH SMBus Header
JSPDIF_OUT1 Sony/Phillips Digital Interface Audio Output Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 UID Switch
LAN1/LAN2 Gigabit Ethernet (RJ45) Ports
LAN3/LAN4 (TLN4F only) 10 Gigabit Ethernet (RJ45) Ports
SLOT4 PCI-Express 3.0 X4 (IN X8) Slot supported by Intel PCH
SLOT6 PCI-Express 3.0 X16 Slot supported by the CPU
SLOT7 PCI-Express 3.0 X4 (IN X8) Slot supported by Intel PCH
SP1 Internal Speaker/Buzzer
USB0/1 Back panel Universal Serial Bus (USB) 2.0 Port
USB2/3 Back panel Universal Serial Bus (USB) 3.0 Port
USB4/5, 6/7, 8/9 USB 2.0 Headers
USB10/11 USB 3.0 Header
USB12 USB 2.0 Type A Port
VGA/DVI-I Back Panel VGA Port, DVI-I Port
To Next Page
Loading...
