15
Chapter 1: Introduction
Note: The table above is continued on the next page.
Motherboard Features
I/O Devices
• Serial (COM) Port • Two (2) serial-port headers
• SATA 3.0 • Four (4) SATA 3.0 ports supported by Intel PCH (I-SATA 0-3)
• Audio Port • One (1) Audio Front Panel header via Realtek ALC888S
USB
• Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
• Six (6) USB 2.0 ports with three (3) internal headers (USB 4/5, 6/7, 8/9)
• Two (2) USB 3.0 ports on the rear I/O panel (USB 2/3)
• Two (2) USB 3.0 ports with one (1) internal USB 3.0 header (USB 10/11)
• One (1) Type-A USB 2.0 connector (USB 12)
BIOS
• 128 Mb SPI AMI BIOS
®
SM Flash UEFI BIOS
• PnP Support, PCI 3.0, Keyboard/Mouse support, Hardware BIOS virus protect, RTC (Real Time Clock) wakeup, ACPI
5.0 support, SMBIOS 3.0, UEFI 2.3.1
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Wake-On-Ring
• Wake-On-LAN
• Management Engine (ME)
System Health Monitoring
• Onboard voltage monitoring for +3.3V, 3.3V standby, +5V, +5V standby, +12V, VBAT, CPU, GPU, Memory, PCH Temp.,
System Temp., Memory Temp.
• CPU/system overheat LED and control
• CPU Thermal Trip support
• CPU switching phase voltage regulator
• CPU Thermal Design Power (TDP) support of up to 95W (See Note 1 on next page.)
Fan Control
• Fan status monitoring via BMC
• Dual cooling zone
• Low-noise fan speed control
• Pulse Width Modulation (PWM) fan control
System Management
To Next Page
Loading...
