Supermicro X11SSZ-TLN4F - Page 51

51
Chapter 2: Installation
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED Indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the DP port on the back panel. The UID LED
(LED1) is located next to the UID switch. When you press the UID switch, the UID LED will
be turned on. Press the UID switch again to turn off the LED indicator. The UID Indicator
provides easy identication of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
UID Switch
Pin Denitions
Pin# Denition
1 Ground
2 Ground
3 Button In
4 Button In
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied
USB10/11(3.0)
AUDIO FP
PCH SLOT4 PCI-E 3.0 X4(IN X8)
CPU SLOT6 PCI-E 3.0 X16
PCH SLOT7 PCI-E 3.0 X4(IN X8)
DP1/DP2
VGA/DVI
LAN3/4
LAN1/2
USB2/3(3.0)
IPMI_LAN
USB0/1
1
1
1
1
1
1
1
1
1
X11SSZ-F
REV: 1.10
MAC CODE
MAC CODE
MAC CODE
MAC CODE
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
CPU Socket LGA1151
S/N CODE
Intel
C236
1
1
USB8/9
USB6/7
USB4/5
I-SGPIO1
JPW2
SP1
BT1
LED1
LED2
JD1
JBT1
JPI2C1
JGPIO1
FAN4
FAN2
FAN1
FANB
FANA
FAN3
JTPM1
JSPDIF_OUT1
JL1
J18
JI2C2 JI2C1
JPW1
JPME2
JBR2
JBR3
JPL3
JPL2
JPL1
JBR1
JWD1
JPB1
JPG1
JPAC1
COM2
COM1
LED4
LED3
JSD1
J15
DIMMA1 DIMMA2
DIMMB1
DIMMB2
JF1
I-SATA1
I-SATA2
I-SATA3
I-SATA0
JUIDB1
JIPMB1
JSMB1
1
1
1
JVR1
JVRM1
JVRM2
USB12
4
3
2
JPWR1
1
1. UID Switch
2. UID LED
2