Supermicro X11SSZ-TLN4F - Page 55

55
Chapter 2: Installation
SMBus to PCI-E Slots
Use jumpers JI
2
C1 and JI
2
C2 to enable PCI-E SMB (System Management Bus) support to
improve system management for the onboard PCI-E slot.
BMC Enabled
JPB1 allows you to enable or disable the BMC (Baseboard Management Control) chip and
the onboard IPMI connection for debugging purpose only. This jumper is used together with
the IPMI settings in the BIOS. After the BMC is disabled, IPMI health monitoring and remote
management functions are no longer supported.
Note: Please aways keep BMC enabled to make sure the platform operates reliably
with the health monitor.
BMC Enable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
1. SMBus to PCI-E Slots
2. BMC Enabled
USB10/11(3.0)
AUDIO FP
PCH SLOT4 PCI-E 3.0 X4(IN X8)
CPU SLOT6 PCI-E 3.0 X16
PCH SLOT7 PCI-E 3.0 X4(IN X8)
DP1/DP2
VGA/DVI
LAN3/4
LAN1/2
USB2/3(3.0)
IPMI_LAN
USB0/1
1
1
1
1
1
1
1
1
1
X11SSZ-F
REV: 1.10
MAC CODE
MAC CODE
MAC CODE
MAC CODE
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
CPU Socket LGA1151
S/N CODE
Intel
C236
1
1
USB8/9
USB6/7
USB4/5
I-SGPIO1
JPW2
SP1
BT1
LED1
LED2
JD1
JBT1
JPI2C1
JGPIO1
FAN4
FAN2
FAN1
FANB
FANA
FAN3
JTPM1
JSPDIF_OUT1
JL1
J18
JI2C2 JI2C1
JPW1
JPME2
JBR2
JBR3
JPL3
JPL2
JPL1
JBR1
JWD1
JPB1
JPG1
JPAC1
COM2
COM1
LED4
LED3
JSD1
J15
DIMMA1 DIMMA2
DIMMB1
DIMMB2
JF1
I-SATA1
I-SATA2
I-SATA3
I-SATA0
JUIDB1
JIPMB1
JSMB1
1
1
1
JVR1
JVRM1
JVRM2
USB12
4
3
2
JPWR1
1
2
SMBus to PCI-E Slots
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)