Chapter 4: BIOS
83
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Enabled and Disabled.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options are
Enabled and Disabled.
PCH SLOT4 PCI-E 3.0 X4 (IN X8)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU SLOT6 PCI-E 3.0 X16
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
PCH SLOT7 PCI-E 3.0 X4 (IN X8)
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specied by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system boot. The
default setting for LAN1 Option ROM is PXE.
Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port2 used for system boot. The
default setting for LAN2 Option ROM is Disabled.
Onboard LAN3 Option ROM
Use this option to select the type of device installed in LAN Port3 used for system boot. The
default setting for LAN3 Option ROM is Disabled.
Onboard LAN4 Option ROM
Use this option to select the type of device installed in LAN Port4 used for system boot. The
default setting for LAN4 Option ROM is Disabled.
Onboard Video Option ROM
Use this feature to select which rmware type to be loaded for the onboard video controller.
The options are Disabled, Legacy, and EFI.
To Next Page
Loading...
