Supermicro X12SAE-5 - Page 9

Package contents
• One Supermicro Motherboard
• Four SATA Cables
• One I/O Shield
• One Quick Reference Guide
Connector Description
12V_PUMP_PWR1 12V 4-pin Power Connector for CPU Liquid Cooling Pump
AUDIO Back Panel High Denition Audio Ports
AUDIO_FP Front Panel Audio Header
BT1 Onboard Battery
COM1 COM Port Header
CPU_FAN1, CPU_FAN2 CPU Fan Headers
CPU SLOT4 PCIe 4.0 x8 (IN x16) Slot
CPU SLOT7
PCIe 4.0 x16 Slot
* For Intel® Xeon® W-1200 and 10th Generation Intel Core™ i series processors, both CPU SLOT4 and SLOT7 will oper-
ate at Gen. 3.
DP / HDMI Back Panel DisplayPort / High Denition Multimedia Interface
DVI Digital Video Interface (DVI-D)
I-SATA0 - I-SATA5 Intel Serial ATA (SATA 3.0) Ports (6 Gb/second)
IPMI_LAN Dedicated IPMI LAN Port (X12SCA-5F only)
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JLED1 3-pin Power LED Header
JPI2C1 Power Supply SMBus I
2
C Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JSD1 SATA DOM (Disk-On-Module) Power Connector
JSTBY1 Standby Power Header (5V)
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
LAN1, LAN2 LAN1: RJ45 1 Gb LAN Port, LAN2: RJ45 2.5 Gb LAN Port
MH10, MH11, MH14, MH15 M.2 Mounting Holes
PCI-E_M.2-M1
PCIe 3.0 x4 M.2 M-key Socket (Supports 22110/2280 form factors, RAID 0/1)
(Small form factor devices and other portable devices for high speed NVMe SSDs)
PCI-E_M.2-M2 PCIe 3.0 x4 M.2 M-key Socket (Supports 2280 form factor, RAID 0/1)
PCI-E_M.2-M3
PCIe 4.0 x4 M.2 M-key Socket (Supports 2280 form factor)
* For Intel Xeon W-1200 and 10th Gen. Intel Core i series processors, PCI-E_M.2-M3 will be disabled.
PCH SLOT2, PCH SLOT5 PCIe 3.0 x1 Slots
SLOT1 PCI 33MHZ PCI Slot, 32 Bit/33 MHz with 5V Single Voltage
SP1 Internal Speaker/Buzzer
SYS_FAN1 - SYS_FAN3 System Fan Headers
UID Unit Identier (UID) Switch (X12SCA-5F only)
USB0/1 Front Access USB 2.0 Header
USB2/3 Front Access USB 3.2 Gen. 2x1 Header (5 Gb, Type-A)
USB4, USB5, USB6, USB7 Back Panel USB 3.2 Gen. 2x1 Ports (10 Gb, Type-A)
USB8 Back Panel USB 3.2 Gen. 2x2 Port (20 Gb, Type-C)
USB9 Front Access USB 3.2 Gen. 2x2 Header (20 Gb, Type-C)
VGA VGA Port (X12SCA-5F, IPMI only)
Jumpers and Connectors
Jumper Description Default
JBT1 Clear CMOS (Onboard) Short Pads to Clear CMOS
JD1 Speaker / Buzzer
Pins 1-4: External Speaker
Pins 3-4: Buzzer
JPAC1 HD Audio Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable (X12SCA-5F only) Pins 1-2 (Enabled)
JPL1, JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (Reset)
Connectors
Jumpers