Supermicro X9DRW-3F - Default Chapter; About this Motherboard

Preface
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X9DRW-3F/X9DRW-iF motherboard.
About This Motherboard
The Super X9DRW-3F/X9DRW-iF motherboard supports dual Intel E5-2600(v2)
Series Processors (Socket R LGA 2011) and Intel QPI (QuickPath Interface) Tech-
nology (V.1.1), providing point-to-point connections with transfer speeds of up to 8.0
TG/s. With the Intel PCH C606/C602 chipset built in, the X9DRW-3F/X9DRW-iF
motherboard supports Intel
®
Intelligent Power Node Manager (IPNM), Management
Engine (ME), Digital Media Interface (DMI), PCI-E Gen. 3.0, and up to 1866 MHz
DDR3 memory. These features greatly enhance system performance for 1U/2U
servers. This motherboard is ideal for high-end server platforms. Please refer to our
Website (http://www.supermicro.com) for processor and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board. It also provides detailed information about the Intel PCH C606/C602 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on how to congure the CMOS Setup settings.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software installation instructions.
Preface
iii