©2017 Skier’s Choice, Inc.
69
High
Dual Battery (Option) Hookup
To properly hook up the two batteries;
1. Connect the grounding strap provided from the negative (-) post on Battery
1 to the negative (-) post on Battery 2.
2. Connect the negative (-) cable from the grounding buss bar to the negative
(-) post on Battery 1.
3. Connect the negative (-) cable from the engine to the negative (-) post on
Battery 1.
4. Connect the positive cable from the left side of the battery switch to the positive
(+) post on Battery 1.
5. Connect the positive cable from the bottom of the switch to the positive (+)
post Battery 2.
Battery 1 is designated as the primary battery and Battery 2 is designated as the
secondary battery.
Skier’s Choice installs a 4-position battery switch on any boat equipped
with dual batteries. It is recommended that both batteries be fully charged
between each use to insure they can deliver the electrical demands required
for each outing. The purpose of our recommendation is to utilize one primary
battery for all operational needs, and have the other as a backup if the
primary battery discharges. (CONTINUED ON NEXT PAGE).
To Next Page
Loading...
