SAFETY INFORMATION
- Use a single power socket instead of
multiple sockets that have been plugged
in by multiple devices, as this may cause
fire or electric shock.
- Do not let metal or liquid enter the
device. Otherwise, fire or electric shock
may occur, and internal parts may be
damaged, resulting in device damage.
- Do not use AC power exceeding 100-240V.
- It is strictly forbidden to disassemble or modify the label machine
without authorization, which may cause fire or electric shock caused by
high voltage parts.
- Please keep the label printer away from alcohol, gasoline, and other
flammable solvents and fire sources to avoid deflagration and fire.
- Use wrung-out wet gauze to clean the device. Do not use flammable
organic solvents.
- Please use the label printer in a clean place. Do not use it on carpets
or blankets, otherwise, a large amount of dust will quickly cause a
short circuit.
- This printer has a cutter, please be
careful when using it to avoid injuries.
- Please use SUPVAN’s original label
paper and do not remove the sticker on
the label paper, otherwise, the device
cannot identify the type of the label paper
and cannot print it.
- If the use of non-original label paper
causes equipment damage, we will not be
responsible for the warranty.
To Next Page
Loading...
