Supvan TP76E - User Manual

Questions and Answers

R
russellbrianAug 16, 2025
Why is the printing not clear on my Supvan Label Maker?
- P
  Patrick MitchellAug 17, 2025
  There are several reasons why the printing might not be clear. The tube media might be too hard or have stains, in which case you should clean the tube or replace it. The ribbon could be curled; try taking it out, coiling and leveling it, or replacing it. The print head may be worn or scratched, requiring replacement. Also, ensure the media specification is set correctly on the machine to match the actual media. Finally, the ambient temperature might be too low or high; adjust the printing density or change the ambient temperature.
S
Sue SavageAug 19, 2025
What to do if print content is incomplete on Supvan TP76E Label Maker?
- C
  Chelsea BennettAug 19, 2025
  If the print content is incomplete, it could be due to several reasons. The character size might be set too large; try resetting to a smaller size. The ribbon could be out of place, so take it out and adjust it. Also, ensure the media specification is set correctly on the machine to match the actual media. Finally, the print head may be worn or scratched, requiring replacement.
S
Steven TaylorAug 21, 2025
Why are the print media not fed in my Supvan TP76E Label Maker?
- R
  Randall WrightAug 22, 2025
  If the print media are not being fed, it could be due to a few reasons. Ensure the tensile force on the tube is no more than 5.0N; otherwise, the printer won't feed media successfully. The roller might not be clean, so please clean it. There could also be a foreign body in the channel; clean the channel to resolve this.
J
Jesus MartinAug 25, 2025
How to improve the half-cut effect on Supvan TP76E?
- E
  Ebony GarrettAug 25, 2025
  If the half-cut effect is not good, the half cutter might be blunt. Please replace it with a new one.
F
Felicia RoseAug 27, 2025
Why does the label stick to the cutter on my Supvan TP76E Label Maker?
- A
  Amy WilliamsAug 28, 2025
  If the label is sticking to the cutter, it could be because the half-cut is too deep; select a smaller half-cut depth. Alternatively, there might be adhesive on the blade; clean the blade to resolve this.
N
Nathan HerreraAug 30, 2025
What causes the actual segment length to differ from the setting on my Supvan TP76E?
- C
  Charles Ramos MDAug 30, 2025
  If the actual segment length differs from the setting, it could be due to different media being used. Please adjust by using the Test function.
B
Benjamin MartinezSep 2, 2025
What to do if the ribbon is out of way and curled in Supvan Label Maker?
- D
  David BaileySep 2, 2025
  If the ribbon is out of way and curled, the tube adjuster may need replacing. Alternatively, the ribbon itself may need to be replaced.
H
Holly CabreraSep 5, 2025
How to center content after half-cut on Supvan Label Maker?
- P
  Patrick JamesSep 5, 2025
  If the content is not centered after a half-cut, it could be due to using different media with different segment lengths. Please adjust the position of contents in segment length by using the Margin setting.
T
taylor59Sep 7, 2025
Why does my Supvan TP76E act without printing content?
- K
  Katherine MasonSep 7, 2025
  If your label maker acts without printing content, the print head might not be connected correctly; ensure it is properly connected. Alternatively, the print head could be damaged and need replacement.
J
Jamie MacdonaldSep 10, 2025
What to do if the roller is wrapped with label in Supvan Label Maker?
- T
  thompsontrevorSep 10, 2025
  If the roller is wrapped with the label, it is because rubber is left on the label surface. Press [Rev Feed] to take it out.

Summary

Declaration and Introduction

Brief Introduction of Special Functions

Overview of the printer's special functions and capabilities.

Precautions and Warnings

Warning

Critical warnings regarding safe operation and potential hazards.

Chapter 1 Appearance Description and Configuration

Appearance Parts of Supvan Tube Printer

Identifies and labels the physical components of the tube printer.

LCD Display Description

Explains the various elements and indicators shown on the LCD screen.

Included Items

Lists all the accessories and components included in the printer package.

Chapter 2 Function Keys Overview

Media Selection

Selects the type of media (tube, label, shrink tube).

Segment Length and Character Size

Sets the length of each segment and character size.

Margin and Character Spacing

Adjusts print margin and spacing between characters.

File Management and Sequence Settings

Manages files and enables sequential numbering.

Stop and Cut Depth Functions

Stops printing and adjusts the half-cut depth.

Print and Test Functions

Initiates printing and tests print effects.

Chapter 3 Consumable Installation

Installation and Removal of Ribbon Cassette

Guides on installing and removing the ribbon cassette.

Installation and Removal of Label Cassette

Instructions for installing and removing the label cassette.

Installation and Removal of Tube Adjuster and Tube

Details on inserting and removing the tube adjuster and tube.

Replacement of Half-cutter and Cutting Board Assembly

Procedures for replacing the half-cutter and cutting board.

Chapter 4 Basic Operation

Print of Tube

Step-by-step guide for printing on tubes.

Print of Label

Instructions for printing on labels.

Print of Heat Shrink Tube

Procedure for printing on heat shrink tubes.

Chapter 5 Operation of Function Key

Key Operation Notes

General notes regarding function key usage and screen display.

ESC Key Function

Exits current operations or returns to previous menus.

Media Selection Function

Selects the type of media (tube, label, shrink tube).

Segment Length Function

Sets the length of each segment for printing.

Total Length Adjustment

Corrects the total print segment length.

Character Size Function

Defines the size of characters to be printed.

Repeat Function

Sets the number of times a segment will be repeated.

Frame Function

Adds frames or underlines to printed content.

Margin Function

Adjusts the print start and vertical position.

Character Space Function

Sets the spacing between characters.

Sequence (SEQ) Function

Enables sequential numbering or lettering for segments.

Set Cut Function

Configures the cutting method (half-cut, solid line).

File Management Functions

Manages document files (save, open, delete).

Stop Printing Function

Stops the current printing process.

Cut Depth Function

Adjusts the depth of the half-cut function.

Print Function

Initiates the printing of all entered content.

Test Function

Tests print effect and measures segment length.

Low Temp Mode Setting

Activates or deactivates low temperature mode.

Screen Brightness Adjustment

Adjusts screen brightness and contrast.

Repeat and SEQ Priority Settings

Sets print priority between Repeat and SEQ functions.

Chapter 6 Performance Description

Chapter 7 Computer Software Configuration

Software Configuration of TP76 E Tube Printer

Lists the minimum system requirements for the software.

Chapter 8 Others

Specification of Original Consumables

Lists compatible consumables and their models.

How to Operate the Tube Printer Correctly

Provides essential guidelines for correct printer operation.

Simple Troubleshooting

Lists common faults, causes, and solutions.

List of Special Symbols

A comprehensive list of special symbols available for printing.

Supvan TP76E Specifications

General

Brand	Supvan
Model	TP76E
Category	Label Maker
Language	English

Related product manuals

Supvan LP5120M

13 pages

Supvan KATASYMBOL E10

16 pages