Supvan TP76E - Cut Depth Function

SUPVAN Chapter 5 Operation of Function Key
41
Press【Rev Feed】, it will display as below:
20
4
Y
N
1
4
Please confirm feed reversal?
Yes No
After selecting Yes, press 【 Enter 】 , the rubber roller may rotate reversely.
Repeat the operation till get the entanglement out.
Note:
 Before taking the reverse operation, make sure to open the Upper Cover.
The print head will return to a non-print state.
5.19 【Home】
This function is to move the cursor to the first segment of current file.
5.20
【
End
】
This function is to move the cursor to the last segment of current file.
5.21 【Cut Depth】