SUPVAN Preface
4
Precautions
Warning
1. Please use a single power socket. Do not use any socket inserted with multiple
devices, this may cause a fire or electric shock.
2. Do not let any metal or liquid get into tube printer. This may cause fire or
electric shock or machine damage.
3. Do not use power plug with wet hand in case of any electric shock.
4. When open the upper cover, do not let any object contact with the moving part
of tube printer.
5. Use voltage between 100 and 240V AC. If not, it may result in fire, electrical
shock or machine failure.
6. Do not disassemble or modify the tube printer without any authorization. This
may lead to fire or electric shock.
7. Please let the tube printer away from alcohol, gasoline and other flammable
solvents as well as any ignition source to prevent any deflagration and fire.
8. When clean the tube printer, please use wet gauze that has been twisted
closely. Do not use any flammable organic solvent.
9. When find any abnormal smell or noise in operation, please turn off the tube
printer immediately, pull out its plug and contact with your dealer.
10. Please use the tube printer in a clean place. Do not use it on carpet. Otherwise,
the dust may cause short circuit or even fire.
11. When there is any foreign object getting into the tube printer, do not use it in
case of any damage.
12. The machine can only print Φ≤6.0mm tube or heat shrink tube. Printing Φ ＞
6.0mm tube may affect the print effect, cause a printing error, or even damage
the print head.
To Next Page
Loading...
