LIGHT ACTIVATION
I haven’t actually turned one on and off, so please have the product manager write
something up and I’ll tighten it up. Make sure they tell how to do it both manually and
with the app...I haven’t actually turned one on and off, so please have the product
manager write something up and I’ll tighten it up. Make sure they tell how to do it
both manually and with the app...
FIREPAK CAN BE ACTIVATED EITHER MANUALLY
OR VIA ITS BLUETOOTH APPLICATION.
To activate the light manually
1. TURN LIGHT ON BY:
Moving slide switch to position 3 through to activate light at lowest setting.
Slide switch to positions 4-6 for more light
TO ACTIVATE VIA BLUETOOTH APPLICATION:
1 Download the application from iTunes or Google Play.
2 Move slide switch from the off position (Position 1) to pairing mode (Position 2)
3 Open application. Select FirePak from new devices menu. It will appear by it’s
serial number.
4 A message will appear when device and app have paired. Press Ok.
5 Push/Select ash mode and select the output level.
6 Slide dot across line to desired output level. Press ash to set and exit ash mode.
To Next Page
Loading...
