CONTENTS INSIDE YOUR INCUBATOR:
Plastic Egg Trays:
Eggs are placed in the
egg trays for the first 18
days of incubation.
(Remove plastic cable
ties before use)
Plastic Water Pan:
(Located below hatching crates)
Water evaporating from the pan
creates humidity required for
incubation.
The water pan will automatically fill
itself with water coming from the
bucket on top of the machine.
Incubator Control Panel:
Shows incubator
temperature and humidity %
Water Bucket:
Must be filled with clean
water. Bucket supplies
water to water pan inside.
Refill when empty
Black Plastic
Hatching
Crates:
This is where you
move the eggs to
on Day 18.
Chicks will hatch
in these crates
on day 21.
Chicks must be
removed from
the hatching
crates and
placed in a
brooder after
hatching. Chicks
can stay in the
hatching crates
for up to 24
hours after they
have hatched.
Temperature and humidity
Sensor:
Sensitive to water -
Don’t spray water directly
onto sensor when cleaning
machine!
Egg
Turner
Motor
with
release
clutch
Humidity
Control Air
Vents
Connection
pipe for
water
bucket
Auto ON/OFF Switch:
Incubator will switch off
when you open the door
and back on as you close it
To Next Page
Loading...