What to do if SureLife Blood Pressure Monitor displays Err 2?
If your SureLife Blood Pressure Monitor displays “Err 2”, it means there was movement during the measurement or signal interference. To resolve this: * Do not move during measurement. * Remove any interfering sources such as mobile phones or magnets.
How to fix Err P on SureLife SL-BA201?
If your SureLife Blood Pressure Monitor shows “Err P”, it indicates a failure to inflate. You should check if the cuff is properly connected. If the air tube is broken, replace it.
General| Display | LCD |
|---|---|
| Measurement Method | Oscillometric |
| Accuracy (Pressure) | ±3 mmHg |
| Memory | Yes |
| Power Source | 4 x AA batteries |
| Cuff Size | 22-32 cm |
| Automatic Shut-off | Yes |
| Irregular Heartbeat Detection | Yes |
| WHO Classification Indicator | Yes |
| Measurement Range (Pulse) | 40-180 bpm |
| Accuracy (Pulse) | +/- 5% |
| Memory Capacity | 60 readings |
To Next Page
