Need help?Do you have a question about the SureShot Zoom and is the answer not in the manual?
General| Brand | SureShot |
|---|---|
| Model | Zoom |
| Category | Measuring Instruments |
| Language | English |
Once activated, the LCD display will remain active and show the last distance measured for 15 seconds.
Press and hold to toggle units; quick press to cycle between Scan, Pulse, and Default modes.
Adjust the eyepiece diopter for clear vision if you have farsighted or nearsighted vision.
Instinctively locks onto the nearest target for accurate distance readings.
Distance displays for 15 seconds after each power button press.
Ensures accurate targeting from the longest possible distances.
Displays continuous distance updates across a panoramic area.
Press the Mode button for 5 seconds to switch between metres and yards.
The device automatically switches off after 15 seconds of inactivity.
Low battery warning, approx. 3000 actuations, and accuracy at +/- 1 metre/yard.
Recommended for warranty purposes and quick customer service access.
Instructions for cleaning lenses and maintaining the device.
Key advice on battery, eyepiece, water resistance, and sunlight exposure.
Contact support via website, telephone, or email for assistance.
Warrants product free from material defects for one year, or two years if registered.
Steps for returning product, obtaining RA number, proof of purchase, and shipping.
To Next Page
