Need help?Do you have a question about the Survision Nanopak 3 and is the answer not in the manual?
Overview of where SURVISION cameras can be installed, including barrier columns, totems, poles, walls, ceilings, or gantries.
Key principles for clear field of vision and distance/angle restrictions to ensure optimal camera performance.
Guidelines for car-parks and toll booths when reading license plates from the front of the vehicle.
Guidelines for ceiling-mounted cameras reading license plates from the front.
Guidelines for car-parks and toll booths when reading license plates from the rear of the vehicle.
Covers assembly procedures for weak/strong electric current and installation of factory-assembled totems.
Details MICROPAK features, wall/ceiling mounting, connector assembly, and power supply.
Covers VISIPAK features, bracket installation, graduated bracket, connector assembly, and visor attachment.
Step-by-step guide to aim and configure SURVISION cameras using the VSS software.
Recommendations for cleaning camera glass and checking fittings for optimal performance.
Circumstances and procedure for updating camera firmware remotely via IP network.
Essential checks and procedures to perform before sending a camera for repair.
Process for returning faulty sensors to SURVISION, including packaging and declaration requirements.
General| Frame Rate | 30 fps |
|---|---|
| Night Vision | Yes |
| Weather Resistance | Yes |
| Resolution | 1920 x 1080 |
| Power Supply | 12V DC |
To Next Page
