Copyright SURVIVOR FILTER™ 2018
PRECAUTIONS
•
Survivor Filter PRO X
3 Filter Components Provide Triple Filtration
The Ultra Filter Pre-Filter provides the first line of defense
to remove large particles from incoming water. Insert the
Ultra Filter Pre-Filter (make sure to attach it to the Water
Inlet Hose
first) directly into the water to be filtered. Use
the
Float to keep the Ultra Filter Pre-Filter away from
mud or sediment. The
Ultra Filter Pre-Filter must be fully
submerged in the water for proper operation of the
Survivor Filter PRO X. The
Ultra Filter Pre-Filter can be
reused up to 100,000 liters (26,417 gallons).
Heavily polluted water or water with a high concentration
of silt will plug the
Ultra Filter Pre-Filter and shorten its
life prematurely, avoid if possible. Clean/replace the
Ultra
Filter Pre-Filter
as necessary.
Component #1 - The Ultra Filter Pre-Filter
To Next Page
Loading...