Copyright SURVIVOR FILTER™ 2018
Survivor Filter PRO X
How to Use
Connect Water Inlet Hose to Water Inlet Fixture.
Ensure that the Ultra Filter Pre-Filter is attached to
other end of Water Inlet Hose.
Connect Water Outlet Hose to Water Outlet Fixture.
Ensure that other end of Water Outlet Hose drains
into a clean receptacle.
Assembly
Power Supply Options
There are several different ways to power the Survivor
Filter PRO X
Two AA baeries: Slide open the battery cover, insert
the batteries and close the cover. Make sure the cover
is closed properly to ensure a water resistant seal.
External battery or solar pack (not included): Open the
USB cover and connect the Micro USB cable to the PRO
X. The other end can be connected to your power source.
Electrical outlet/wall socket: Connect the Micro USB
cable to the PRO X and plug the other end into the wall.
To Next Page
Loading...