Sutphen SP70 - Aerial Tower Lubrication and Maintenance Schedule

SUTPHEN TOWERS, INC. 2012
Manual-2012 _SL75-SA75-SP70.docx Page 37 of 55 8/31/2012
AERIAL TOWER LUBRICATIONAND MAINTENANCE SCHEDULE
LUBRICATION POINTS LUBRICANT INTERVAL MONTHLY ANNUALLY
STABILIZERS Multi-Purpose Grease AS NEEDED OR X
MAIN LIFT CYLINDER Multi-Purpose Grease 25 OPERATING
HOURS OR X
PIVOT SHAFT BEARING Multi-Purpose Grease 25 OPERATING
HOURS OR X
TURNTABLE BEARING Multi-Purpose Grease FIRST 3 MO. THEN X
DRIVE GEAR None Required
ROTATION GEAR 140 wt. Gear Oil AS NEEDED OR X
EXTENSION-RETRACTION CYLINDER(S) Multi-Purpose Grease
(SL75 only)
EVERY 6
MONTHS OR X
OUTRIGGER PINS Multi-Purpose Grease X
X
SHEAVES AND CABLES Multi-Purpose Grease 25 OPERATING
HOURS OR X
SLIDE BLOCKS McLube 25 OPERATING
HOURS OR
X
X
WATERWAY AND SEALS 30 wt. Non-Detergent
Motor Oil/Dextron III X
WATERWAY NOZZLE Multi-Purpose Grease X
PLATFORM POWER CABLE Dow #4 Silicone Grease AS NEEDED OR X
LEVELING SYSTEM Dextron III X
HYDRAULIC OIL Dextron III ADD AS NEEDED 2 YRS.
HYDRAULIC OIL FILTER(S) None Required CHANGE AT 50
OPERATING HOURS
or FIRST 3 MONTHS
(whichever comes
first) THEN
X